Home » Shop » Victron Energy Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC Charger

Victron Energy Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC Charger

$243.95

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch. Multiple units can be connected in parallel to increase output power.

SKU: ORI121236120 Categories: , , ,

The Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or as a power supply (it is also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from discharge.

Bluetooth Smart enabled 

  • Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
  • Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the Device list page without the need to connect to the product.

Fully programmable

  • Battery charge algorithm (configurable) or fixed output.
  • Smart alternator compatibility: engine running detection mechanism.

Adaptive 3-stage charge algorithm: bulk – absorption – float

  • For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
  • For lithium batteries absorption time is fixed, default 2 hours.
  • Alternatively, a fixed output voltage can be chosen.

Remote on/off

A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

All models are short-circuit proof and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

High temperature protected

The output current will reduce at high ambient temperature.

IP43 protection

When installed with the screw terminals oriented downwards.

Screw terminals

No special tools needed for installation.

Input fuse (not replaceable)

Specification Heading Specification Detail
Weight 4.3 lbs
Input Voltage Range 10-17V
Under Voltage Shutdown 7V
Under Voltage Restart 7.5V
Output Voltage Adjustable Range 10-15V
Output Voltage Tolerance +/- 0.2V
Output Noise 2 mV rms
Continuous Rated Output 30A
Continuous Output Power 360W
Efficiency 87%
Power Supply Mode Yes
DC Connection Screw Terminals
Maximum Cable Size 6AWG
Ingress Protection IP43 (electronic components) | IP22 (connection area)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Scroll to Top